Linear Tomography is a radiographic technique that uses motion to demonstrate anatomy lying in a plane of tissue, while blurring or eliminating structures above and below the plane of interest. This technology led to the development of CT (Computerized Tomography), which is more widely used today. In addition to linear tomography, other types of tube and film motion have been used. These motions include circular, elliptical, hypocycloidal, trispiral. Each of these motions has advantages regarding the way in which out of plane structures are blurred. For example, a linear structure which is aligned with the linear motion of a linear tomograph, will not appear blurred, except at the ends, whereas such a structure will be blurred by the circular motion of a circular tomograph.
PURPOSE
By moving an x-ray source and the film in opposite directions during the exposure structures in the focal plane appear sharper, while structures in other planes appear blurred. By adjusting the direction and range of the movement, operators can select different focal planes which contain the structures of interest.
PRINCIPLE
The tube and the image receptor move during the exposure in opposite directions around a stationary fulcrum, the pivot point.
The tube and the image receptor are attached by a rod as described in the equipment section of this blog.
EQUIPMENT USED
Most features of a tomographic x-ray imaging system appear similar to those of a conventional radiographic imaging system.
No comments:
Post a Comment